Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Categories

In this Discussion

Install errors

RockWare Incorporated
in LMD ElPack Vote Up0Vote Down
I have just dowloaded and installed "LMD VCL Complete 2025 (2 licenses)". I am using RAD Studio 11 Alexandria.  When I start Delphi I get the following errors:
RAD Studio 11: bds.exe - Entry Point Not Found
------------------------------------------------------
bds.exe - Entry Point Not Found
---------------------------
The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcgoogle12svc280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcgoogle11svc280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcgoogle280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcdropbox280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcdropbox280.bpl. 

Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcdropbox280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcboxnet280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcboxnet280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcgoogle280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcgoogle4svc280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcwrappers280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcwrappers280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcgoogle280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcgoogle280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcgoogle280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcdropbox280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcdropbox280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcdropbox280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcapiexplorer280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcboxnet280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcruntime280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcboxnet280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

The procedure entry point @System@Net@Urlclient@TAsyncReadStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcruntime280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcgoogle280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\ngcgoogle8svc280.bpl. 

The procedure entry point @System@Net@Urlclient@TURLStream@$bcctr$qqrv could not be located in the dynamic link library 
C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcwrappers280.bpl. 


Can't load package C:\Users\Public\Documents\Embarcadero\Studio\22.0\Bpl\dclngcwrappers280.bpl.
The specified procedure could not be found.
Do you want to attempt to load this package the next time a project is loaded?

And when I try to compile I get an Internal Error at the uses clause for ElSplit

Comments

  • 3 Comments sorted by Votes Date Added
  • RockWare Incorporated
    Posts: 21Vote Up0Vote Down
    [dcc64 Fatal Error] LoadResource.pas(22): F2084 Internal Error: URW8057
  • Rafael Maricca (LMD)
    Posts: 0 Accepted Answer Vote Up0Vote Down
    Hi,

    one important information is missing: WHICH version of RAD Studio 11? There was a lot of trouble with 11.X releases because breaking changes were introduced by EMBT between service packs. Our tools are always built against latest release (here 11.3). When you are using an older version, precompiled packages won't work.

    Your options then:
    - Update your RAD Studio version to 11.3
    - Uninstall precompiled packages. Reinstall source code version and compile packages manually. This will work on any RAD Studio 11.X version. Note: As VCL Complete user you can use DevUtil from the source repo.

    Such problems were quite common 3 years ago, simply search for Delphi 11 and URW8057
  • RockWare Incorporated
    Posts: 21Vote Up0Vote Down
    LMD VCL Components 2025.4
    Embarcadero® Delphi 11.0 Version 28.0.42600.6491 
    Alexandria
    I will uninstall precompiled packages. Reinstall source code version and compile packages manually.
Sign In or Register to comment.